Omega DP26-RTD Instrukcja Użytkownika Pobierz pdf (Strona 59)

ANALOG OUTPUT (if applicable)

Signal type: Current or voltage

Signal level: Current: 10 V max compliance at 20 mA output

Voltage: 20 mA max for 0-10 V output

Function: May be assigned to a display range or proportional

control output with setpoint #1 when used as a

control output.

Linearity: 0.2%

Load Regulation: 1.1%

Line Regulation: 0.02% /V ac

Step Response Time: 2 - 3 seconds to 99% of the final value

ALARM OUTPUTS (if applicable)

2 Form "C" on/off relays. Configurable for latched and unlatched by software.

Max current: 5 AMPS, resistive load.

Max voltage: 250 V ac or 30 V dc

ISOLATED ANALOG OUTPUT (TB5, if applicable)

Same as non-isolated analog output except isolated to 1000 Vdc.

Signal Type: Current or voltage

Signal Level: Current: 10 V max compliance at 20 mA output

Voltage: 20 mA max for 0-10 V output

Function: May be assigned to a display range or proportional

control output with setpoint #1 when used as a

control output.

Linearity: 0.2%

Step Response Time: 2 - 3 seconds to 99% of the final value

Only one analog output is available on each unit and it must be factory installed.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64

Brak uwag

Omega DP26-RTD Instrukcja Użytkownika Strona 59